| |
|
Printable
Version (.pdf)
|
|
5783R90015
Hi
Hide Red Tooling Gel Coat
Product
Description
5783R90015 Red Tooling Gel Coat combines neopentyl glycol and
iso-resins, monomers and reinforcing fillers for longer high-gloss
retention and the extra durable surface needed for mold manufacturing.
It develops its maximum barcol hardness and toughness after approximately
one week at normal temperature. Heating will speed up this cure
process. It is excellent for all FRP mold making applications.
Typical
Physical Characteristics (All Tests at 77º
F.)
| Weight
Per Gallon: |
9.0 - 10.0 Pounds
|
|
Viscosity:
|
2400 - 2800
Brookfield LVT #4 @ 60 rpm
|
| Thix
Index: |
5.0
- 7.0 |
| Gel
Time: |
18 - 22 Minutes 2%
MEKP
|
| Flash
Point: |
85º
F.
|
| Shelf
Life: |
3
months from date of shipment |
| Barcol
Hardness: |
After
3 hrs - room temperature:17 |
| Barcol
Hardness: |
After
24 hrs - room temperature:35+ |
| VOC: |
100
grams/liter per
SCAQMD Method 304-91 |
| %
Monomer: |
45%
Maximum |
|
Values
listed are typical indicators only. In-mold coating physical
properties may vary with usage and storage conditions.
|
Application
WORKS
EXTREMELY WELL IN CONVENTIONAL EQUIPMENT
Tooling Gel Coats are formulated for spray application as
supplied. Thinning is not recommended. For catalyzation, use MEKP
@ 2% for gel times of 18 - 22 minutes at 77º
F. Do not catalyze at levels below 1-1/2% or above 3%. Apply in
several thin overlapping coats rather than a single thick coat.
This will help avoid sagging, porosity, solvent entrapment and other
defects. Make sure the air pressure is adjusted properly, and that
the spray gun lines are free of solvent, water and oil. Apply to
a thickness of 24 to 28 mils wet. Brush application is not recommended.
• Keep containers away from heating pipes or radiators.
• Use a "first-in-first-out" system of stock rotation
to ensure use within 75 day period.
|
LIMITED WARRANTY
AND DISCLAIMER
The
data on this sheet represent typical values. Since application variables are
a major factor in product performance, this information should serve only as
a general guide. Valspar assumes no obligation or liability for use of this
information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT.
VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Your only remedy for any defect in this product is the replacement of the defective
product, or a refund of its purchase price, at our option.
|
|
|
