| |
|
Printable
Version (.pdf)
|
|
87-X5
Plastilease 334
Product
Description
87-X5 Plastilease 334 is a creamy tan paste release agent that
is superior for use with epoxy and phenolic resins. It works jointly
as a sealer and a release agent. Ideal for use on porous mold surfaces.
It facilitates easy release of molded parts, reduces rejects and
also lessens wear on molds. This formulation is a precision blend
of inorganic waxes, completely non-silicone and non-transferring,
so it will not interfere with post-finishing or painting. It can
be used at temperatures up to 500° F., an unusually high capacity
for a release agent.
Typical
Physical Characteristics (All Tests at 77º
F.)
| Weight
Per Gallon: |
6.7 - 7.1 Pounds
|
| Viscosity: |
Loose
Paste |
| Flash
Point: |
120° F.; Seta-Flash, Closed Cup
|
| Shelf
Life: |
6
months from date of shipment.
|
| VOC
per EPA Method 24 |
737
gm/liter
|
Application
87-X5
Plastilease 334 is easily wiped or spread over the mold surface,
however it cannot be polished to a high gloss like most waxes. If
rubbed vigorously when dry, it will crumble or wear away. It should
be applied liberally, then rapidly wiped down to help close mold
pores and develop a smooth gloss. When used over dry plaster, it
may eliminate the need for a film-forming agent.
NOTE:
For very stubborn release situations, many users have found unmatched
results by blending together equal parts, by weight, of 87-X26 Mold
Release 225 and 87-X5 Plastilease 334. This blend has been successful
for filament wound or similar low-draft lay-ups where single agents
have proved insufficient.
|
LIMITED WARRANTY
AND DISCLAIMER
The
data on this sheet represent typical values. Since application variables are
a major factor in product performance, this information should serve only as
a general guide. Valspar assumes no obligation or liability for use of this
information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT.
VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Your only remedy for any defect in this product is the replacement of the defective
product, or a refund of its purchase price, at our option.
|
|
|
