| |
|
Printable
Version (.pdf)
|
|
87X32
Mold Release 605
Product
Description
87X32
Mold Release 605 is a low toxicity, low flammability release
agent specially formulated for hard metal and non-porous molds.
It is widely used in cultured marble casting over glass, Formica,
stainless steel or aluminum surfaces and provides a clean, fast
parting action in a variety of mold-making processes. 87X32 features
a low-flammable solvent with a high flash point which results in
fewer vapors and hazards in the work environment.
Typical
Physical Characteristics (All Tests at 77º
F.)
| Weight
Per Gallon: |
6.5 - 6.9 Pounds
|
| Flash
Point: |
Over 150° F., Seta-Flash, Closed Cup
|
| Shelf
Life: |
6
months from date of shipment.
|
| VOC
per EPA Method 24 |
763
gm/liter
|
Application
87X32
Mold Release 605 can be sprayed or wiped on in a thin coat. A light,
uniform film application is recommended for best results.
For
difficult mold configurations, we recommend 87X11 Mold Sealer 306B,used
in conjunction with 87X32 Mold Release 605. A thin over-wipe of
87X32 over a coat of 87X11 provides excellent release of parts from
complicated operations.
|
LIMITED WARRANTY
AND DISCLAIMER
The
data on this sheet represent typical values. Since application variables are
a major factor in product performance, this information should serve only as
a general guide. Valspar assumes no obligation or liability for use of this
information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT.
VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Your only remedy for any defect in this product is the replacement of the defective
product, or a refund of its purchase price, at our option.
|
|
|
