| |
|
Printable
Version (.pdf)
|
|
87X30
Molgard X
Product
Description
87X30
Molgard X is an internal release agent that is added to the resin
when hard metal and matched die molds are used. It is a light amber-colored
liquid that will not affect normal cure time and temperature, and
will not alter pot life. It lowers resin surface tension in the
resin mix, permitting improved wetting of fillers and reinforcements,
and good uniformity in the finished parts.
Typical
Physical Characteristics (All Tests at 77º
F.)
| Weight
Per Gallon: |
8.0 - 8.4 Pounds
|
| Flash
Point: |
Over 200° F.; Seta-Flash, Closed Cup
|
| Shelf
Life: |
6
months from date of shipment.
|
| VOC
per EPA Method 24 |
.039
lb/gallon or 4.64 gm/liter
|
Application
87X30
Molgard X is added to the resin mix at low levels (1 to 2% by weight).
It functions best in matched-die molding.
|
LIMITED WARRANTY
AND DISCLAIMER
The
data on this sheet represent typical values. Since application variables are
a major factor in product performance, this information should serve only as
a general guide. Valspar assumes no obligation or liability for use of this
information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT.
VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Your only remedy for any defect in this product is the replacement of the defective
product, or a refund of its purchase price, at our option.
|
|
|
