| |
|
Printable
Version (.pdf)
|
|
87X144
Plastilease 275
Product
Description
87X144
Plastilease 275 Mold Release is a fast-drying, room temperature
mold release for metal molds. Designed to withstand high heat (600°
- 700° F), it is ideally suited for epoxy and polyester resins
and high performance composite systems. Applies easily; once applied,
it forms a very thin film that bonds to metal and produces a semi-permanent
type release. Provides quick, easy release of molded parts.
Typical
Physical Characteristics (All Tests at 77º
F.)
| Weight
Per Gallon: |
6.3 - 6.7 Pounds
|
| Flash
Point: |
23°
F.; Seta-Flash, Closed Cup
|
| Shelf
Life: |
One
year from date of shipment.
|
Application
Before
applying 87X144 Plastilease 275 it is important to prepare
the metal mold by cleaning the mold surface and removing all wax,
oil or silicones that may be on the mold. After cleaning, apply
the mold release by spray or hand wiping. Allow several minutes
for solvent evaporation before use. Resin curing temperatures in
the 600° to 700° F. range are acceptable. To renew the release
surface as it gradually wears off, simply re-coat.
|
LIMITED WARRANTY
AND DISCLAIMER
The
data on this sheet represent typical values. Since application variables are
a major factor in product performance, this information should serve only as
a general guide. Valspar assumes no obligation or liability for use of this
information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT.
VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Your only remedy for any defect in this product is the replacement of the defective
product, or a refund of its purchase price, at our option.
|
|
|
