| |
|
Printable
Version (.pdf)
|
|
87X11
Mold Sealer 306B
Product
Description
87X11 Mold Sealer 306B is an easily applied paste wax of soft
consistency. It has numerous uses, being a combination primer, sealer
and release agent. It is especially effective on porous mold surfaces
such as wet or dry plaster, and is excellent for use in cultured
marble casting.
Typical
Physical Characteristics (All Tests at 77º
F.)
| Weight
Per Gallon: |
6.7 - 7.1 Pounds
|
| Viscosity: |
Paste |
| Flash
Point: |
146° F.; Seta-Flash, Closed Cup
|
| Shelf
Life: |
6
months from date of shipment.
|
| VOC
per EPA Method 24 |
5.8
lb/gallon or 620 gm/liter
|
Application
87X11
Mold Sealer 306B is an easy spreading paste. Apply over the mold
surface, wipe off excess and buff with a clean cloth.
|
LIMITED WARRANTY
AND DISCLAIMER
The
data on this sheet represent typical values. Since application variables are
a major factor in product performance, this information should serve only as
a general guide. Valspar assumes no obligation or liability for use of this
information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT.
VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Your only remedy for any defect in this product is the replacement of the defective
product, or a refund of its purchase price, at our option.
|
|
|
