|
5776W90650
Neo Reduced Monomer Gel Coat
Product
Description
5776W90650
Reduced monomer ISO/NPG Gel Coat is made with Isophthalic NPG
resin and quality pigments. It cures to an extremely tough, high-gloss
finish that provides superior resistance to weathering, water, corrosion
and chalking. 5776 Series gel coats are ideal where highest quality
performance is a must. They are currently being used in the marine
and transportation industries and can also be used in applications
requiring resistance to severe outdoor exposure.
5776W90650
is formulated with a restricted monomer level to reduce emissions
n the workplace without compromising exterior durability or performance.
Typical
Physical Characteristics (All Tests at 77º
F.)
| Weight
Per Gallon: |
10.0–11.0 Pounds
|
|
Viscosity:
|
2400-2800
cps. Brookfield RVT #4 @ 50 rpm
|
| Thix
Index: |
5 .0 - 7.0
|
| Gel
Time: |
10 - 14 Minutes 2% MEKP
|
| Cure
Time: |
1
Hour |
| Cover
& Hide: |
10 - 14 mils
|
| VOC:
|
95
grams/liter per
SCAQMD Method 304-91 |
| %
Monomer: |
33%
Maximum |
| Flash
Point: |
88°
F (Seta-Flash Closed Cup)
|
| Shelf
Life: |
3
months from date of shipment |
|
Values
listed are typical indicators only. In-mold coating physical
properties may vary with usage and storage conditions.
|
Application
WORKS
EXTREMELY WELL IN CONVENTIONAL EQUIPMENT
5776-Series
gel coats are formulated for spray application as supplied.
Thinning is not recommended. For catalyzation, use MEKP @ 2% for
gel times of 12 - 14 minutes at 77º F. Do not catalyze at levels
below 1-1/2% or above 3%. Apply in several thin overlapping coats
rather than a single thick coat to help avoid sagging, porosity,
solvent entrapment and other defects. Make sure the air pressure
is adjusted properly, and that the spray gun lines are free of solvent,
water and oil. Apply to a thickness of 18 - 25 mils wet. Brush application
is not recommended.
•
Store containers indoors or under cover.
• Normal storage area temperature should be 65º F.
- 80º F.
• Use only original containers full and sealed.
• Keep containers away from heating pipes or radiators.
• Use a "first-in-first-out" system of stock rotation
to ensure use within 90 day period.
|
