| |
|
Printable
Version (.pdf)
|
|
5776W90065
Neo Gel
Coat
Product
Description
Valspar
5776W90065 (766W8183) Neo Gel Coat is based on our NEO®
polyester and formulated with quality raw materials for outstanding
application and performance properties.
•
NPG-ISO Based
• Outstanding Water Resistance and Weathering Properties
• Excellent Patching Capabilities
• Highly Resistant to Pre-Release
• Consistent
Mold Release, Minimizing Pull-Cracking
Typical
Physical Characteristics (All Tests at 77º
F.)
| Weight
Per Gallon: |
10-11 Pounds
|
|
Viscosity:
|
14,000 - 18,000 cps.
Brookfield:
LVF #4 @ 6 rpm
|
| Thix
Index: |
4.8 - 7.0
|
| Gel
Time: |
13-18 Minutes 1.25%
MEKP
|
| Cover
& Hide: |
10 - 14 mils
|
| Flash
Point: |
90º
F (Seta-Flash Closed Cup)
|
|
Values
listed are typical indicators only. In-mold coating physical
properties may vary with usage and storage conditions.
|
Application
As
with all coatings, mix 5776W90065 well before applying. It
is formulated for airless spraying as supplied. Thinning is not
recommended. To
catalyze, use a brand of Methyl Ethyl Ketone Peroxide (MEKP) specifically
designed for gel coats. Do not catalyze at levels below 1.0% or
above 2.5% as this may result in curing problems or other physical
defects.
For
optimum performance apply in 5-7 mil passes to a recommended dry
film thickness of 18 mils minimum. Exceeding 30 mils dry will lead
to premature yellowing. Make sure the air pressure is properly adjusted,
and the spray gun and lines are free of solvent, water and oil.
•
Store containers indoors or under cover.
• Normal storage area temperature should be 65º F.
- 80º F.
• Use only original containers full and sealed.
• Keep containers away from heating pipes or radiators.
• Use a "first-in-first-out" system of stock rotation
to ensure use within 90 day period.
|
LIMITED WARRANTY
AND DISCLAIMER
The
data on this sheet represent typical values. Since application variables are
a major factor in product performance, this information should serve only as
a general guide. Valspar assumes no obligation or liability for use of this
information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT.
VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Your only remedy for any defect in this product is the replacement of the defective
product, or a refund of its purchase price, at our option.
|
|
|
