Product
Description
Aztec Ultimate High Performance In-mold Coatings provide a
"factory fresh" appearance much longer than standard gel
coats with normal maintenance. They have outstanding gloss retention
and great resistance to color change.
Aztec
gel coats have exceptional resistance to cracking, fading, chalking
and yellowing. They are ideal for Boats, RV's, architectural and
exterior applications, providing maximum added value to your finished
product.
Typical
Physical Characteristics (All Tests at 77º
F.)
| Weight
Per Gallon: |
10.0 - 10.5 Pounds
|
|
Viscosity:
|
Brookfield
RVT #4 @ 20 rpm; 4300-4700 cps.
Brookfield RVT #4 @50 rpm: 2000-2400 cps.
|
| Thix
Index: |
4.0-7.0
|
| Gel
Time: |
12-16
Minutes; 2.0% MEKP-9 @ 77º F
|
| Lay
Up Time: |
1
Hour |
| Flash
Point: |
57º
F. |
| HAPsr: |
34.5% |
|
Values
listed are typical indicators only. In-mold coating physical
properties may vary with usage and storage conditions.
|
Application
WORKS
EXTREMELY WELL IN CONVENTIONAL EQUIPMENT
Aztec
Ultimate High Performance in-mold coatings are formulated for spray
application as supplied. Thinning is not recommended. For catalyzation,
use MEKP-9 @ 2.0 % for gel times of 12-16 minutes at 77º F.
Do not catalyze at levels below 1-1/2% or above 2.5%. Apply in several
thin overlapping coats rather than a single thick coat. This will
help avoid sagging, porosity, solvent entrapment and other defects.
Make sure the air pressure is adjusted properly, and that the spray
gun lines are free of solvent, water and oil. Apply to a thickness
of 18 - 25 mils wet. Brush application is not recommended.
•
Store containers indoors or under cover.
• Normal storage area temperature should be 65º F.
- 80º F.
• Use only original containers full and sealed.
• Keep containers away from heating pipes or radiators.
• Use a "first-in-first-out" system of stock rotation
to ensure use within 90 day period.
|
