| |
|
Printable
Version (.pdf)
|
|
5797W90031
HF+
White Gel Coat
Product
Description
Valspar
5797W90031 High Flex Plus Gel Coat is based on a proprietary
polyester resin that offers excellent flexibility without compromising
the outstanding weathering and water resistance offered by an NPG-IPA.
More than ten years field experience has shown that 5797 Gel Coats
have exceptional crack resistance due to bending or abuse. This
product has significantly higher elongation than conventional gel
coats. Ideal for high-end boats and RV's.
Typical
Physical Characteristics (All Tests at 77º
F.)
| Weight
Per Gallon: |
10.9 lbs. per gallon +/- 0.1 lbs
|
|
Viscosity:
|
RPM. 16000-18500 CPS; Brookfield LVF#4 @6rpm
|
| Thix
Index: |
6.0-8.0
|
| Gel
Time: |
15-18
Minutes 1.5% DDM9
|
| Flash
Point: |
90º
F (Seta Flash Closed Cup) |
| Gel
Coat Elongation: |
1.4%-1.7% |
| Total
HAPs |
Less than 33%
|
|
Values
listed are typical indicators only. In-mold coating physical
properties may vary with usage and storage conditions.
|
Application
As
with all coatings, mix 5797W90031 High Flex Plus Gel Coats
well before applying. 5797W90031 is formulated for airless spraying
as supplied. Thinning is not recommended. To catalyze, use a brand
of Methyl Ethyl Ketone Peroxide (MEKP) specifically designed for
gel coats. Do not catalyze at levels below 1.0% or above 2.5% as
this may result in curing problems or other physical defects. For
optimum performance apply in 5-7 mil passes to a recommended dry
film thickness of 18 mils minimum. Exceeding 30 mils dry will lead
to premature yellowing. Make sure the air pressure is properly adjusted,
and the spray gun and lines are free of solvent, water and oil.
- Store
containers indoors or under cover.
- Normal
storage area temperature should be 65º F. - 80º F.
- Use
only original containers full and sealed.
- Keep
containers away from heating pipes or radiators.
- Use
a "first-in-first-out" system of stock rotation to ensure
use within 90 day period.
|
LIMITED WARRANTY
AND DISCLAIMER
The
data on this sheet represent typical values. Since application variables are
a major factor in product performance, this information should serve only as
a general guide. Valspar assumes no obligation or liability for use of this
information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING, VALSPAR MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT.
VALSPAR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Your only remedy for any defect in this product is the replacement of the defective
product, or a refund of its purchase price, at our option.
|
|
|
