|
Valspar's
T-PAR Resins are designed with the special needs of spa manufacturers
in mind. They can be applied on various pre-formed plastics such as
ABS and Acrylic used in designer bathware. This unique technology
is engineered to give unsurpassed adhesion with the highest filler
loads known in the industry. |
| |
→ |
T-PAR Provides Excellent Adhesion to ABS and Acrylic |
| |
|
• |
Eliminate
the vinyl ester "skin coat" step on production, saving
time, raw material investment, inventory costs and production area
space.
|
| |
|
• |
Decrease
rejects, returns and associated costs.
|
| |
|
|
| |
→ |
T-PAR
Provides the Highest Filler Loads in the Industry |
| |
|
• |
Decrease
Overall applied cost |
| |
|
• |
Lower
Relative Styrene Content |
| |
|
• |
Maintain
Low Viscosity with High Thix Index |
| |
|
|
-No
sagging
-Low Pump Pressures
|
| |
|
|
| |
→ |
T-Par
Exhibits Low Exotherm Properties |
| |
|
• |
Eliminate
or Reduce Distortion From Heat |
| |
|
• |
Reduce
Rejects |
| |
|
• |
One-step
Production vs. Multiple Lamination Passes |
|
|
|
|
|
→ |
T-PAR
Works With ANY Acrylic Sheet |
|
|
• |
Buy
whichever is most cost-effective |
|
|
• |
No
More Matching Resin to Sheet or Sheet to Resin |
|
|
• |
Use
Co-Extruded Sheets |
|
|
|
|
|
→ |
T-PAR
Provides Good "Wet-Out" |
| |
|
• |
Spend
Less Time "Rolling Out" Parts |
| |
|
• |
Save
Time and Money in Production |
| |
|
|
|
| |
→ |
T-PAR
Provides Fast Barcol Development |
| |
|
• |
Increase
Production Line Speeds |
| |
|
|
| |
→ |
Use
T-PAR to Reinforce Gel Coats |
| |
|
• |
Keep
Only One Resin to do Both Jobs |
| |
|
|
|
| |
→ |
Use
Your Current Application Equipment |
| |
|
|
|
